SL-414A 14,000 lbs. 4 Post lift + 2 x RJ8 + DWA3500 3D wheel alignment system combination

  • SL-414A 14,000 lbs. 4 Post lift + 2 x RJ8 + DWA3500 3D wheel alignment system combination
Availability:
In Stock
Product Code:
SL-414A & DWA3500
Brand:
TECHNOLIFT & CEMB
$30 770,00

SL-414A 14,000 lbs. 4 Post Alignment lift includes a set of front turntables. The slip plates are built into the runways and are level with the front turntables.

SL-414A 14,000 lbs. 4 Post Alignment lift uses a high strength cable system (with a under runway oversized hydraulic cylinder) powered by a 220 volt (single phase) power unit to raise and lower the lift. Rolling jacks are available as an option.

Once a vehicle is positioned on the SL-414A 14,000 lbs. 4 Post Lift, the optional rolling jack RJ-7 can lift the vehicle off of the runways to perform wheel service. The air powered hydraulic RJ-7 rolling jack has telescoping arms that extend over the runways to access lift points. These jacks have stack on truck adapters.

• 14,000 lb. capacity
• Alignment slip plates and turntables
• Air Line Kit included with the purchase of two rolling jacks
• Diamond plate runway surface
• Mounting hardware included
• Accommodates a wide variety Of wheelbases
• Powder coat finish
• Air operated single point lock release
• Optional front extension kit available.

DWA3500 3D wheel alignment system
• Movable cameras automatically adjustable with lift height.
• Quarterly updates of the data bank for clear, rapid selection of different versions of vehicles.
• Frontal assistance video camera to help get onto the lift.
• Wheelbase, track and diagonal measurements to prevent damage from accidents.
• Wheel diameter measurements to verify correct pressure.
• Single raised wheel run-out for smaller workspaces or lifts with stairs.
• Measurements with 2 targets for long vehicles.
• Caster angle and friction range measurements.
• Audit Function: identification of driving problems, resulting from measures not contemplated in the specifications to support the regulation service.

DWA3500 3D wheel alignment system for cars and light commercial vehicles, with a completely redesigned cabinet with drawers and housings for printer and accessories, an easy accessibility for maintenance and an advanced software.
• Movable cameras automatically adjustable with lift height.
• Quarterly updates of the data bank for clear, rapid selection of different versions of vehicles.
• Frontal assistance video camera to help get onto the lift.
• Wheelbase, track and diagonal measurements to prevent damage from accidents.
• Wheel diameter measurements to verify correct pressure.
• Single raised wheel run-out for smaller workspaces or lifts with stairs.
• Measurements with 2 targets for long vehicles.
• Caster angle and friction range measurements.
• Audit Function: identification of driving problems, resulting from measures not contemplated in the specifications to support the regulation service.

Specification

Specs
Shipping Dimensions 218"x22"x45",60" x 48" x 48"
Related Accessories
Related accessories TEC-SL-414A,CEM-DWA3500,TEC-RJ5/TP8,TEC-AW32